Tag Archives: Mirrorless Cameras

Flash Sync Speed Limitation – a question from a subscriber

Question: “One thing I am curious about is the shutter with regards to off camera flash. Is there still a physical shutter that limits me to a max synch speed of around 1/200 of a second? Or have they moved to an electronic shutter that would allow much faster synch times?”

In order to appropriately respond to the question lets first understand how mirrorless camera sensors operate. Most mirorless cameras use CMOS sensors that contain light sensitive pixels arranged in rows. These sensors are always live as long as the camera is powered on and booted up.

Panasonic LUMIX FL580L Flash: Hybrid Flash System with Built-in Video LED

Panasonic LUMIX FL580L Flash: Hybrid Flash System with Built-in Video LED

In the mirrorless world, the sensor information is being constantly fed to the LCD and/or the electronic viewfinder. When you press the shutter the following sequence takes place: a) the sensor is wiped clean electronically; b) next the sensor is turned on and receives light while the pixels record the information; c) now the computer in the camera reads the data collected by the sensor pixels to generate the image. This data is finally recorded to the memory card.

We know that the sensor is sensitive to light and always receiving information. In order to capture a good image, the sensor should be restricted from receiving light while it is being wiped clean and then again when it is reading the data captured during exposure. As the sensor data is being read you do not want the pixel information changing with any new light that may fall on the pixels. So, for both these events, mirrorless cameras use electronic or mechanical shutters or a combination of the two.

The electronic shutter works by first erasing all the pixel data on a row-by-row basis. Then new image information is gathered and the data is read by the computer on a row-by-row basis very similar to how a television picture is generated. All of this takes time, albeit just a fraction. The greater the number of pixels the more the rows of information and the slower the process. This limits the cameras from achieving high shutter speeds. For proper exposure these rows of pixels gather the same amount of light but do so a row at a time. The data is read at the same rate. The collective time determines the fastest achievable electronic shutter speed.

We are aware that to expose properly for flash photography all the pixels must be “alive” and ready to receive data while the flash is on. If the row by row read process starts too early then you will get areas of dark under exposure. In order to properly expose for flash, the computer in the camera has to wait before it can start reading the data collected by the sensor. This wait time determines the highest sync speed for flash photography.

As an adjunct to this, in order to achieve higher shutter speeds mirrorless cameras use mechanical second curtains. The curtain can rapidly close all light from entering the sensor while the computer reads the information. On the Sony A7 that has a 24 MP sensor, there are 4000 rows of pixels. The only way to attain shutter speeds of 1/8000 sec. is possible using a mechanical rear-curtain. On the 36 MP A7r however, there are 4912 rows of pixels. To attain speeds of 1/8000 sec. this camera needs both a front-curtain and a rear-curtain shutter. The MFT cameras like the Panasonic GH4 and the Olympus OM-D series have 16 MP sensors that have only 3456 rows and can achieve 1/8000 sec. electronic shutter speeds without the need for mechanical shutters..

The Sony A7 has an optional mechanical front-curtain that must be deployed when using lenses of longer focal lengths at high shutter speeds.

Unlike DSLR’s, the mechanical shutter on mirrorless cameras remains in an open state in both the powered off and powered on modes, allowing for live view data to be collected and displayed continuously.

The highest flash sync speed is currently 1/320 sec on the Olympus OM-D E-M1 , 1/250 sec on the Panasonic GH4 and under 1/200 sec for most of the Sony cameras.

Hope this explains why the current mirrorless technology is limited and high flash sync speeds are not feasible.  If you have other photography related questions, please do not hesitate to ask and I will do my best to get you answers.

Posted in Accessories, Educational, Mirrorless, Panasonic GH4, Photography, Sony A7R, Tips Also tagged |

Mirrorless Movers™

 

Think Tank Photo just announced their first camera bag collection for Mirrorless cameras, the Mirrorless Movers™.  The Mirrorless Movers come in four sizes that range in size from the Mirrorless Mover 5, which fits one small size mirrorless body with a small telephoto or pancake lens attached, up to the Mirrorless Mover 30i, which fits one medium to large size mirrorless body plus two to four lenses and an iPad.

As is their design philosophy, Think Tank placed a premium on quality.  The new bags utilize metal hardware instead of plastic buckles, and only high quality fabrics, YKK zippers and a new, magnetic closure.  In the words of their president and lead designer Doug Murdoch, “The Mirrorless Movers offer photographers quality in their camera bags worthy of their investment in these sophisticated, expensive camera systems.”

When you click on this special link you will receive free gear with all orders of $50 or more and free shipping on all orders if you order by May 31, 2013.

Click Here

The four sizes are:

  • The Mirrorless Mover 5 fits one small size mirrorless body with a small telephoto or pancake lens attached. It is sized for the Canon EOS–M, Leica D–Lux, Nikon 1 series, Olympus E–PM2, E–PL5, EP–3, Panasonic GF3, Sony NEX–C3, or similar sized bodies.
  • The Mirrorless Mover 10 fits one medium size mirrorless body plus one to two lenses and additional accessories. It is sized for the Leica V–Lux, Olympus OM–D E–M5, Panasonic G3, GF5, GH2, Samsung NX5, NX11, NX210, Sony NEX–5, NEX–6, NEX–7, or similar sized/smaller bodies.
  • The Mirrorless Mover 20 fits one medium size mirrorless body plus two to three lenses and additional accessories. It is sized for the Leica V–Lux, Olympus OM–D E–M5, Panasonic G3, GF5, GH2, Samsung NX5, NX11, NX210, Sony NEX–5, NEX–6, NEX–7, or similar sized/smaller bodies.
  • The Mirrorless Mover 30i fits one medium to large size mirrorless body plus two to four lenses, iPad, and additional accessories or a small–size DSLR and one to three small telephoto lenses or primes. It is sized for the Fuji X–Pro 1, Leica M8, Panasonic GH3 or similar sized/smaller bodies. Small DSLRs: Canon Rebel, Nikon D3200/D5200, Sony SLT–A55/A37 or similar sized bodies.
Posted in Accessories, News Also tagged , |