Edelkrone FlexTilt Head 2
I have just completed a review of the Edelkrone FlexTilt Head 2. The full article can be seen here.In addition I have added a landing page for this and future product reviews. At some point I will add previous review links to this page. The page is a sub menu under "Products"
The New Spectrals
Think Tank Photo have just announced a new line of shoulder bags for DSLR and mirrorless systems. The new Spectral shoulder bags feature a Fidlock clasp that enables one-handed access to gear and then locks automatically when closing the flap. An additional zippered closure gives peace of mind while traveling and can be tucked away when actively shooting. Constructed with durable yet stylish materials, the Spectral Shoulder Bag offers Think Tank quality and ingenuity at a reasonable price. The Spectral 8 is under $100. And don’t forget that when you use my URL you will receive free gear and free shipping with your order of all Think Tank gear, including the Spectrals.CLICK HERE TO CHECK OUT THESE GREAT NEW BAGS
MIOPS Smart Trigger Review
I purchased the MIOPS Smart Trigger last summer after seeing it being used by a few photographers in Europe. This a combination trigger, intervalometer, remote and a whole lot more. The nice part is that it is well built, small and light. The MIOPS can be purchased for $220 to $240 based on the camera cables you need.The unit measures approximately 2.5 in. X 4.0 in. and weighs just under 4.0 oz. including the battery.The MIOPS trigger has six modes of preprogrammed operation and one “Do It Yourself” port. A really useful feature is that you can vary the sensitivity of each of the modes as appropriate. The controller is very durable. I have had it in my bag for over 1 year and is does not show any signs of wear and continues to perform very well.A 128×128 pixel, full-color display, is mounted just above the large buttons, used for operation and selecting menu options on the front of the trigger.The device is powered by a 3.7 V/1020 mAh. lithium-ion rechargeable battery.The MIOPS can be used with Sony, Panasonic, Olympus, Canon and Nikon, as well as other brands. The trigger hardware is identical for all configurations with the exception of the supplied cables that need to match the I/O ports of your camera.
This allows you to use one MIOPS with various camera models as long as you purchase the right connection cables.The trigger unit is used in two ways, either to trigger an external flash or to activate the shutter of your camera. Flash units are connected via the PC sync jack, and cameras are connected via the remote shutter release jack.
The MIOPS internal (replaceable) battery can be charged via a micro-USB cable and any USB charger or your PC’s USB Port,The MIOPS is manufactured using a strong plastic with well configured, raised push button controls. The screen is an LED display and is easy to read in most lighting conditions. It has an internal microphone and a light-sensitive sensor for activating laser and lightning modes. For the DIY mode, an additional port is provided that can be connected to an external sensor.The trigger can be mounted using the camera hot shoe or on any support that has a 1/4 20 screw mount.The MIOPS can be used remotely via the free MIOPS smartphone app for IOS and Android phones.For triggering with the MIOPS it is best to set your camera to manual exposure and manual focus.
HDR Mode: this is a mode that is good for cameras that either do not have an internal bracketing mode or where the camera is limited to just the 3 shot bracket. The MIOPS trigger will allow you to set 3, 5, and 7 shot brackets. I prefer to use the camera’s internal bracketing/HDR modes.
Scenario Mode: works in combination with the smartphone app. You can store up to three different scenarios to the MIOPS to be executed later. When you create a new scenario and run it, it will be also stored to the MIOPS. You can run each scenario later. To make any change you must do it via the app on the phone. The scenario mode screen lets you choose one of three previously stored scenarios. The screen will display which step is currently running and when the scenario ends, the MIOPS will return to the selection screen.
In conclusion, I have no hesitation in recommending the MIOPS Smart. There are a number of other features that are available when you use the smartphone app that I will leave for a future post.MIOPS Triggers are available at Hunts Photo & Video - here is a link to the Panasonic Version - use the search field for other versions. For more information, you can visit the MIOPS web site at www.miops.com
Lume Cube Review
The makers of Lume Cube have a new smaller and less powerful but a highly efficient light designed for phone photography called the Life Lite. This is a smart, Bluetooth controlled, pocket-sized Lifestyle Light for iPhone, Android, DSLR or a GoPro. The Life Light will be available in March.This gadget review however, is of the original Lume Cube and the cheaper version that does not have any bluetooth connectivity. Both are identical in performance and while you can controll one with a smart phone the lite version is all manual. I have been using the Lume Cube for many months and have been most satisfied with its performance and portability. I have used these lights for macro, video and portraiture and love the results they have helped produce.Specs:
- Type LED
- Output Variable: 0 to 1500 Lumens
- Strobe: Variable 1/8000 to 1 second
- Mount Type: 1/4"-20 female
- Power Source: Integrated battery
- Battery Duration: 100% Brightness: 20 minutes; 90% Brightness: 60 minutes; 50% Brightness: 120 minutes
- Power Connector: USB (for charging)
- Waterproof Depth: 100' / 30.5 m
- Dimensions: 1.5 x 1.5 x 1.5"
CLICK HERE TO ORDERThe Lume Cube comes in a small cube shaped cardboard box that contains the Lume Cube and a USB charging cable.You do need to unscrew a small cover to access the charging port. This access cover is a requirement as the Lume Cube is rated to be waterproof to depth of 100 feet.Shaped as a cube, the unit has two rubberized push button switches on the top and a 1/4 20 mount that can be used to mount the light on a light stand, tripod or any flexible light mounting device.The two push buttons control the video light and the alternate flash function of the device. Each time you depress the on/off video switch the light cycles through 10 levels of intensity.
You can also control the Lume Cube using the mobile app. Lume Cube has simplified its lighting controls with a proprietary wireless, Bluetooth-enabled app, available on both Apple iOS and Android. The app is capable of controlling up to 5 Lume Cubes simultaneously. The app allows you to adjust the brightness, flash duration and red eye latency on each Lume Cube independently; and with its onboard optical sensor, Lume Cube can be configured as a slave flash unit to be fired by any other external flash.You have to register your Lume Cube to sync it to your app once registered you can control all your Lume Cube’s power and settings separately.Lume Cube Setup and test for portraitsTo test the Lume Cubes I fitted two Lume Cubes on two separate light stands. The “Main” Lume Cube was place so as to create Rembrandt lighting on the dummy head. The second was place to create a gentle fill. As you can see from the image below, the Lume Cube, due mainly to its size creates a fairly hard light. The settings were ISO 200, f/1.7 at 1/125 sec. using a Panasonic Lumix GX85 body and a Lumix 42.5mm f/1.7 lens wide open. The light emitted is cool and for this test I used an X-Rite Color Checker Passport to balance the temperature.
The second test was conducted with the same placement of the lights but instead of the Lume Cubes facing the dummy head directly the light was bounced off two Rogue Flash Benders. No Diffusion material was used.As you can see the light was much softer and way more pleasing in the image below. The settings were ISO 640, F/1.7 at 1/80 sec. Clearly there is about 3 stops of light loss when using the Flash Benders. However, the soft light is excellent for portraiture.
Lume Cube for Macro/Close-up PhotographyThe Lume Cube produces a really hard light as it is a very small light, but also a very powerful one. The Lume Cubes were about 1.5 inches from the subject. Exposure triad: F/4, 1/800 sec., ISO 640. The lens was a 30mm macro with an extension tube. Camera: Panasonic Lumix GX85.The following is the setup:
The image shown below is a 45 image stack using the GX85's focus bracketing feature.
The portability of these little powerhouses has me convinced, and I tend to carry two in my bag at all times.CLICK HERE TO ORDER
Review of the Platypod Pro Max
A while back I had done a review of the exceptionally versatile and compact Platypod Pro® Deluxe Kit. Now the makers have introduced a follow-up to the Platypod Pro called the Max.Much planning, engineering and fine machining go in to making the Platypod Pro® Max. The Max’s initial form is stamped out of a 5mm thick sheet of aircraft grade aluminum maintaining absolute flatness. Using Computer Aided Manufacturing (CAM), the plate is computer machine precision drilled for all holes and slots. Edges are round-routed and holes either threaded or chamfered to avoid any sharp edges. Key holes slots for attaching the spike screw box are drilled only partway through the plate with very low tolerances to allow easy but firm attachment. These last holes are invisible from underneath the plate.
I have been informed by the manufacturer that the machining quality and workmanship on the Max is so meticulous that despite computer aided manufacturing the factory can only produce 1500 every 25 days!Like the original Platypod Pro the Platypod Pro Max is a sturdy flat mini tripod ideal for low-angle shots and situations where traditional tripods are cumbersome or impractical. It is however, significantly larger, has four spikes/reversible rubber feet rather than three, a belt loop, a single 3/8 inch 16 ball head mounting screw and a 1/4 inch 20 removable stud to mount accessories.
Here is an image captured with the Max set up on top of the stone wall at Tunnel View - Yosemite NP.
Unlike its smaller brother the Max supports ball heads of any size and is rated to support 300 pounds. A 3/8 inch 16 threaded screw hole allows you to mount the Max directly to your tripod as and when needed. Made of aircraft grade aluminum anodized black with beautiful self-explanatory laser etchings, the Max comes in a red microfiber drawstring pouch.
If you already own a Platypod Pro the Max does not replace it, rather it compliments it where situations demand a larger base or when you need to physically move your low lying camera rig across the sand or grass when photographing wildlife.Specifications:
- Base - 6061 black anodized aircraft-grade aluminum. 5 mm thick. 5.25 x 7.75” (5-year warranty—Full replacement of parts for any defect in workmanship.)
- Fiberglass-reinforced nylon removable "bayonet style" storage box mounted onto plate to hold four 1/4-20 spikes, 2 inches long, with heavy-duty rubber feet and locking nuts. Small magnets keep spikes in place for storage.
- Five 1/4-20 threaded holes strategically placed to allow use of spike feet in configurations of one, two, three, or four at a time.
- Two 2-inch belt slots to secure to any cylindrical object or to tape onto floors for remote camera setups.
- 1/4-20 and 3/8-16 accessory threaded holes for attachment to tripods or quick-release devices under the unit.
- 3/8-16 TA2 titanium photographic bolt drilled and countersunk through the plate and welded in place for large tripod ball heads, such as the RRS-BH55, even with spike-feet in place.
- Two non-threaded holes for permanent or semi-permanent mounting to floors, walls, ceilings or panels.
- Weight: 13 ounces, including spikes and storage box.
At approximately 5 x 8 inches it is about the size of an iPad Mini and fits well in any camera case that has a slot or pouch designed to hold a laptop or an iPad. As an option you can use either slot or one of the non-threaded holes and a carabiner to hang the Max from your belt or a loop on your backpack.
As compared to the original Platypod Pro, Max’s larger footprint means more stability. Like the Pro, Max is made of aircraft-grade aluminum with an embedded 3/8-inch titanium bolt. However, it does come with a few features, including a pair of slots that can secure Max via a bungee cord, zip-ties or even your belt to freestanding objects and structures. In the center are 1/4- and 3/8-inch holes to attach Max to quick-release devices, such as the Peak Design Capture Clip, or directly onto a tripod center column. A very convenient 1/4 - 1/4-inch male cross-nut allows attachment of flexible arms, speed-lights and numerous accessories. Here I used a Novoflex Flex Arm and a Lume Cube LED to light the crystal. The camera is a Panasonic GH4 with a 30mm Lumix macro lens. A second 1/4 - 1/4 and a second Flex Arm would be ideal for cross lighting a macro subject.The Max‘s larger base allows use of most any ball head. The RRS B55 is the largest ball head I own and I had no problem attaching it to the Max and all the knobs have adequate clearance. As I no longer use large DSLR’s all my tests were done with Sony and Panasonic mirrorless bodies. Using the Max with an A7RII and the 70 – 200 mm f/4.0 lens was a breeze. I also mounted a Panasonic GH4 with the new Leica 100-400 using a Wimberly SideKick for quick reaction time and maneuverability. When using the Sidekick it is imperative that you remove the holder for the spikes with a simple twist and place the cross-nut in one of the corner positions, out-of-the-way. This gives the sidekick the clearance for 360 degree rotation. The Max supported this rig very well.
With the Platypod Pro you had to be careful mounting heavier gear. It was best to ensure the center of gravity was as close to the center of the Platypod Pro mounted ball-head. With the Max, this is a less of an issue. With a medium or large ball head the Max will comfortably support most DSLRs and mirrorless cameras fitted with normal to long telephoto lenses. A super telephoto lens properly mounted on a good ball head works well too. Here as in the image below I tested it using the RRS BH55 and the Wimberley Sidekick with a Canon 500 mm f/4.0 lens attached to a Sony A7R II using a Metabones IV adaptor.
Similar to the Platypod the Max is ideal great for ground level photography and videography, a mount for action cameras and for creating panoramas. When creating panoramas use a pan/tilt ball head like the Unique as shown below or attach a leveling base (see following image) below the ball head as shown in an image above where the RSS BH55 is mounted on top of the Acratech 1170 leveling base. As the Max is made of a relatively thin aluminum plate it would be difficult to have a built-in level. A third-party bubble level can be adhered to the max or simply place on it to level the Max. When it is necessary to level the Max it is best to use three of the four spikes or rubber ends. Four legs are great for stability but not so for leveling. The Max is best used without spikes or feet when you want to have the flexibility of sliding it in any direction on flat surfaces, sand or grass. When friction is important then the spikes are the best option. In the reverse orientation the rubber caps not only provide friction preventing the base from sliding around but also prevent damage to furniture, painted surfaces, etc.
For surfaces like asphalt, rocks and brick the spikes are your best choice for stability. To attach the base plate to a fence post, rail or tree limb, a pair of bungee cords, straps or your belt work great. All you need is to secure the cord around your object and hook the ends into the slots or holes in the base plate. Belts and straps can be passed through the slots on each side of the Max to secure it to any post, tree trunk or similar object.The Max with its little brother the Platypod Pro have a permanent home in my photography kit. I find I am using these support systems more than using my tripods.More on the Platypod products and their web siteAll company names, products and devices mentioned in this review are trademarks of the respective companies, registered in the U.S. and other countries.
PANASONIC LUMIX G LEICA DG SUMMILUX 12mm, F1.4 ASPH Lens announced
Following up with the release of the exceptional Leica 100 - 400 mm nature and wildlife photographers' dream lens, Panasonic has announced a new Leica 12mm (24 mm equivalent on MFT bodies) f/1.4 weather sealed wide-angle prime lens. Suitable for great landscapes and with this f/1.4 speed it will be ideal for astro photography. This will be Panasonic's widest non-fish eye prime lens in the MFT lineup. Hope to have one in my kit for my Iceland workshop in September.It will be available later this summer for $1300 (rounded).Here is the press release:NEWARK, NJ (July 1, 2016) – Panasonic unveiled a new LEICA DG SUMMILUX 12mm/F1.4 ASPH. (35 mm camera equivalent: 24 mm) digital interchangeable lens for Digital Single Lens Mirrorless camera based on the Micro Four Thirds standard. The new 12mm wide-angle lens enables photographers to capture beautiful group, event, and nature photography. It also allows indoor shooting in low lighting and produces an impressive, natural defocusing effect with its F1.4 aperture. In addition, the LEICA DG SUMMILUX 12mm/F1.4 ASPH. boasts a rugged, splash/dust-proof design (when combined with splash and dustproof LUMIX G Mirrorless camera models) to meet the needs of a wide-range of photographic situations.Integrating two aspherical lenses, two UED (Ultra Extra-Low Dispersion) lenses and an ED (Extra-Low Dispersion) lens, the lens system is comprised of 15 elements in 12 groups. The adoption of five special lenses makes it possible to meet the stringent LEICA standard for exceptional image quality with high resolution and minimum distortion. In general, flare is commonly seen around the periphery of a point source with many high-speed lenses when a large aperture is employed. However, the new LEICA DG SUMMILUX 12mm/F1.4 ASPH. achieves high resolution from the center of the image to the corners by suppressing this flare. Users can take advantage of this lens to shoot a brilliant night skies or night scenes containing illumination to capture true-to-life images with minimal blurring and distortion at the edges. The multi-coated lens elements also minimize ghosting and flaring.Incorporating an inner focus drive system and a stepping motor, the new LEICA DG SUMMILUX 12mm/F1.4 ASPH. is capable of smooth, silent operation together with the camera’s high-speed, high-precision contrast AF system for both photo and video recording. It is also compatible with the sensor drive at a maximum of 240 fps to take full advantage of cameras with high-speed AF. This stunning AF performance is excellent for recording 4K videos, where precise focusing is essential.The LEICA DG SUMMILUX 12mm/F1.4 ASPH. comes with an aperture ring for direct, intuitive aperture control. Nine blades give the aperture a rounded shape that produces an attractively smooth effect in out-of-focus areas when shooting at larger aperture settings. A highly reliable metal mount assures durability for repeated use. The lens mount, the barrel and the hood are all made of metal to provide a sleek, sophisticated design that matches the entire line-up of LUMIX G Digital Single Lens Mirrorless (DSLM) cameras.Specifications:
| Focal length | 12 mm |
| Maximum aperture | F1.4 |
| Minimum aperture | F16 |
| Aperture ring | Yes |
| Number of diaphragm blades | 9 |
| Elements | 15 |
| Groups | 12 |
| Special elements / coatings | 2 aspherical lenses, 1 ED lens, 2 UED lenses |
| Minimum focus | 0.20 m (7.87″) |
| Maximum magnification | 0.1× |
| Autofocus | Yes |
| Motor type | Stepper motor |
| Weight | 335 g (0.74 lb) |
| Diameter | 70 mm (2.76″) |
| Length | 70 mm (2.76″) |
| Filter thread | 62.0 mm |
| Hood | Yes |
Zeiss Batis 2.8/18 Lens for Sony E-Mount Announced
The ZEISS Batis 2.8/18 expands the Batis range of lenses with a super wide-angle lens. For the Sony α system with E-mount the new lens, which features a diagonal angular field of 99 degrees, is currently the shortest full-frame fixed focal length with autofocus. The new ZEISS Batis 2.8/18 with innovative OLED display to show focus distance and depth of field is also impressive thanks to its high image quality across the entire image field. The lens will be available from May 2016.
Think Tank Releases Two New Products
Think Tank Photo have just released the largest photo lighting rolling bag ever and have added a new size and color to their popular Retrospective shoulder bag series. The Production Manager 50 is a monster, designed to hold C-stands, multiple flash heads, power packs, monoblocks, softboxes, and light-stands. What it used to take two people to transport, you can now do by yourself. And, they’ve added a new color—Sandstone—to their Retrospective line, and the new Retrospective 6, which holds Mirrorless systems or a gripped DSLR. Don’t forget, that by using these web links to order you will receive free gear and free shipping.
Click on the links below to order.Production Manager 50Retrospective 6 Shoulder Bag
Day after New Moon
On a whim I set up the Swarovski scope to its lowest magnification at 30X. The camera was the Panasonic Lumix GH4 set at ISO 1600, and 1/60 sec shutter. The image when clicked on is the full frame from the camera 4680 X 3072 pixels. The adjustments made to the raw file are: highlight recovery of -29, white balance adjusted to 5700 Kelvin (to taste), noise reduction using Topaz Denoise version 6. A a touch of contrast and clarity to finish. All this in the hope the weather stays good and I can get a few images of Jupiter this weekend. I did not use a remote shutter release but will for the Jupiter images.
ND Filters' Color Cast comparison - Vü 10 stop Sion, Lee 10 stop (Big Stopper) & Formatt Hitech 8 stop
The Lee Big Stopper was introduced in 2010 to compete with the Hitech 10 stop filter that was known to have flare and other issues. Subsequently Hitech reengineered their 10 stop filter and emulated some of Lee’s design features. In particular the the light blocking gasket. Soon Lee introduced the Little Stopper while Hitech developed a wider range of solid ND filters the Pro Stop line from 6 to 10 stops and in multiple sizes. Most recently I was introduced to the Vü system and hence this test as a comparison. I will do a full review of the Vü system in the near future.As I own the Lee Big sStopper and the Hitech 8 stop with the Hitech holder (I do prefer the Hitech to the Lee holder) I was keen to understand the differences in the way high f-stop ND filters impart a color cast when used. Hence this test. Please click on the images to see a larger version.The set up was fairly simple. Using a Sony A7R II and a Zeiss Batis 85mm f/1.8 lens set at f/2.0 and a base ISO of 50, shutter speed 1/125 sec. The light source was two Elinchrome studio strobes positioned to give a 1/3 stop exposure variation at the edges. The camera was focused on a white foam-core board with a X-Rite Color Checker Passport clamped to the upper right corner. Camera white balance set for flash rather than a custom white balance (5450 Kelvin) and an "as shot" tint of +9. I wanted to allow for any variation in the white of the foam-core board that is typically not 100% white be adjusted in post.The test exposure was made and the white balance adjusted in post using Lightroom - this is the image below. White balance adjustment yielded a temperature of 4750 Kelvin and a tint of -1:
Next the strobes were adjusted to full power providing 8 additional stops of light. The ISO was adjusted to increase sensitivity by two stops while the aperture of the lens was kept at a constant f/2.0 for all the exposures. Each filter was tested for color cast only.
The Lee Big Stopper (10 stop ND)
The Lee Big Stopper (10 stop ND) was mounted and the image as shown below was captured. This is as a screen shot so as to show the RGB histogram. The info panel shows the reading from the center of the captured image. Values are R=219, G=229, B=243
In this next image the Info Panel shows RGB values from the lower third of the image. Values are R=187, G=203, B=222
Next the image was white balanced in Lightroom WB to 8600 Kelvin and tint +43. Compensated for the color of the board and the lights the calculated readings are 7900 Kelvin and a +35 Tint adjustment.
The Lee Big Stopper exhibits a heavy blue cast in both the center and the edges.
Formatt Hitech 8 stop ND filter
As I do not have a 10 stop Formatt Hitech filter, I chose to do the same test with the 8 stop that I own. As with the Lee filter before, here the info panel shows the reading from the center of the captured image. Values are R=234, G=238, B=236
In this next image the Info Panel shows RGB values from the lower third of the image. Values are R=209, G=220, B=212
Next the image was white balanced in Lightroom WB to 5750 Kelvin and tint +52. Compensated for the color of the board and the lights the calculated readings are 5050 Kelvin and a +44 Tint adjustment.
The Formatt HiTech 8 stop exhibits a heavy green cast at the edges but is more neutral in the center.
Vü Sion Q 10 stop Neutral Density Filter
The Vü Sion 10 stop ND filter mounted using The Vü professional filter holder (more abut this in a future post) and the same test was performed. As before the image captured is shown as a screen shot showing the RGB histogram. The info panel shows the reading from the center of the captured image. Values are R=235, G=235, B=239
In this next image the Info Panel shows RGB values from the lower third of the image. Values are R=211, G=214, B=219
Next the image was white balanced in Lightroom WB to 5800 Kelvin and tint +13. Compensated for the color of the board and the lights the calculated readings are 5000 Kelvin and a +5 Tint adjustment.
The Vü Sion 10 stop is very neutral in the center an has a negligible shift at the edges.In conclusion I am very impressed with the Vü Sion 10 stop and is near neutral rendering. My full review of this system is forthcoming.
TWiP Episode 453 – Hot New DSLRs!
If you’ve been listening to TWIP over the years you probably know how we feel about the relatively slow pace of innovation in the “mirrored” camera space… also known as the dSLR.Click here for the Youtube ChannelHere is the link to the TWiP page
Panasonic Leica DG Vario-Elmar 100 - 400mm F/4 - 6.3 lens
Last week at the Space Coast Birding and Wildlife festival I had the opportunity to briefly try out a pre-production unit. The lens was one of the first pre-production units and a lot has changed since it's manufacture. The final units will be way better in image quality, performance and handling. With that said, I will say I was truly impressed with the way the lens performed.The Leica 100-400mm is an f/4-6.3 telephoto zoom lens that gives the equivalent of 200-800mm in 35mm equivalence.The lens has a lockable zoom pull feature, so you can pull the end of the zoom to set the zoom position, or when it is locked, you need to rotate the zoom ring to vary the focal length. The lens has Power Optical Image Stabilization, and high-speed 240fps AF drive, which makes it incredibly fast in focusing performance. It is also, splash and dust proof.A feature I found most useful was the lens collar and foot that also rotates all the lens function switches. This allows you to easily access these in any orientation, landscape or portrait.In thumbnail view, hover over the thumbnail to see the focal length and exposure details. To see a larger rendition of this slide show please click here
Panasonic announces LEICA DG VARIO-ELMAR 100-400mm F4.0-6.3 ASPH Power O.I.S. Lens
Press Release:Panasonic announced today at CES 2016 a new telephoto lens for its LUMIX G range of Micro Four Thirds System cameras – the LEICA DG VARIO-ELMAR 100-400mm F4.0-6.3 ASPH. Telephoto-Zoom (H-RS100400) with Power Optical Image Stabilization (O.I.S.).Small, light and highly durable, the latest addition to Panasonic's range of interchangeable lenses is perfectly suited for photographing birds and other wildlife in all types of environments.The lens is constructed of 20 elements in 13 groups and incorporates a number of aspherical and extra low dispersion elements to assure best quality and avoid flaring. The advanced construction of the new Telephoto-Zoom leads to highest quality standard earning the LEICA Logo for a LUMIX Lens once again.Outstanding image quality and Telephoto-Zoom performanceElegantly designed with a metallic black finish, the new 100mm-400mm LEICA DG VARIO-ELMAR lens from Panasonic provides superb image rendering across the entire zoom range. The lens' 200-800mm focal length (35mm equivalent) and 0.5x Magnification capability provide highly detailed shots from distance, as well as stunning close up capability– ideal for subject matter regardless of shape and size.In order to capture steady, vibration free images across the entire zoom range, the lens also incorporates Power O.I.S. to keep unwanted shaking under control and ensure pictures look crisp and clear.The 100mm-400mm lens is also suited to a variety of photographic styles – with nine diaphragm blades providing a circular aperture to produce a smooth and beautiful bokeh.Smaller and lighter than other Telephoto-Zoom lensesWhen compared with conventional super telephoto DSLR lenses, the latest addition the LUMIX G line up offers outstanding mobility – perfect if you're travelling and don't want to pack too much. Similarly, the lens also boasts a durable, gapless construction so you no longer have to worry about unwanted dust or light rain damaging your equipment.In addition to the lens' practical size and weight, a compact, two-part tripod mount has also been incorporated to enable faster conversion between landscape and portrait orientation. While conveniently and speedily turning to the 90 degree angle, the levers for Focus Limiting, Power O.I.S. and the manual focus switch remain right at your fingertips as they do not move when you turn the lens.The lens also incorporates an integrated, hideaway hood to help you capture that perfect shot, without having to worry about sun glare.Stunning 4K video capabilityPanasonic's new LEICA Telephoto-Zoom lens is perfectly suited for 4K video recording with its construction assuring the best contrast and colors. Furthermore the Telephoto-Zoom incorporates Panasonic's high speed and precise 240 fps AF-motor. Due to the modern design, filming can also be conducted silently, so you can get up close to the subject without drawing attention.As well as high resolution video, the lens' 4K capability also enables you to take photos like never before. Panasonic's 4K Photo function – found on LUMIX G cameras including the LUMIX DMC-G7 – lets you extract an 8-megapixel still from 4K video (30fps) easily right on the camera's screen with a simple fingertip touch.Key features:
- Longest focal length for Micro Four Thirds
- Compatible with Dual Image Stabilization
- 240fps AF Drive
- Zoom ring lock
- Weather Sealing
- Integrated Quick Shifting Tripod Mount
- Integrated shift-away lens-hood
The LEICA DG VARIO-ELMAR 100-400mm lens will be available at www.shop.panasonic.com and valued channel partners for $1799.99 in early April.SPECS:Focal Length: 100 - 400mm Comparable 35mm Focal Length: 200 - 800 mmAperture: Maximum: f/4 - 6.3 Minimum: f/22Angle of View: 12° - 3.1°Minimum Focus Distance: 4.27' (1.3 m)Magnification: 0.25xElements/Groups: 20/13Diaphragm Blades: 9, RoundedImage Stabilization YesTripod Collar: Yes Fixed - rotatingFilter Thread Front: 72 mmDimensions: (DxL) Approx. 3.27 x 6.75" (83 x 171.5 mm)Weight: 2.17 lb (985 g)
Review of the Hähnel Captur Module Pro, Captur Module - IR and the Captur Receiver
Hähnel Captur Module Pro remote trigger with sound, light, laser and IR triggering.
Hähnel of Ireland has replaced the wonderful Giga T pro with Captur Module Pro. Capture is high-speed trigger system that will provide remote triggering, intervalometer functions, delay triggering, long exposure and will will also work as an ordinary flash trigger.Some of the more interesting features are sound, light, laser and infrared sensors for high-speed or wildlife photography. What is even better is that the system has an auxiliary port. This allows you to use any third part triggering devices to be connected to the Captur Module Pro that in turn will trigger your camera.The basic kit comes as a set of two devices. A hand held control unit and a IR transmitter. You will need an optional wireless unit to control your camera wirelessly. The controller is a 2.4GHz transmitter with a range of 320 feet. It will work with either shoe-mount flashes or studio lights as there is a hot-shoe and a sync port. There are models for Nikon, Canon, Sony and Olympus/Panasonic. Best of all the modules all use AA batteries.Features:
- Captures Time Lapse Photography, High Speed Photography, Motion & Wildlife Photography
- Four built-in sensors (light, sound, Laser & IR). The package indicates five built-in sensors however there are four sensors (three windows) and an auxiliary port that can accommodate an infinite variety of sensors and triggers.
- Auxiliary port allows to connect 3rd party sensors such as pressure plates, humidity & temperature sensors
- Fully programmable timed sequences including delay, interval timer, exposure count & exposure length setting
- Shutter release button with autofocus, single & continuous shooting & bulb mode
- Connect wirelessly to camera using the Captur Receiver (sold separately)
Construction:The Captur Module Pro and the IR Transmitter are encased in rubber shield that covers the unit with the exception of the display and control face. Each has a 1/4 20 thread that lets you mount the units on a tripod, light stand or clamp. The IR Transmitter mounts inverted to protect it from the elements. The Capture Receiver is not rubber encased.
Module Pro: The face of the unit has the display window, three buttons - Lock, Trigger and Start/Stop. Blow these is the four way rocker and a center “set” button. The left side has the cameras cable release port and the auxiliary port. The top has the microphone, IR sensor and Light sensor. The right side has a micro USB port that can be used to power the device, and the on/off switch. Note the micro USB port is covered by the rubber enclosure. The underside of the unit has the 1/4 20 mount and the battery compartment also accessible by removing the upper enclosure.
The Module IR has a high/low switch on the front face and the 1/4 20 mount. The IR bean is emitter from the top of the unit.he On/Off switch is located on the left side and the batter compartment is in the bottom also covered by the rubber enclosure.
The Capture Receiver has a flash hot shoe on the face a test button and an indicator light that flashes green when the unit is ready and turns red when the unit is activated. The left side has the remote trigger cabe port while the right has the On/Off switch. The bottom of the unit has a combination hotshot mount and a 1/4 20 mount. Also on the bottom is the battery compartment. Note: this unit does not have a rubber enclosure.Using the units:The handheld remote controller can be connected to your camera with a remote cable or wireless is used with the wireless receiver unit. The controller will allow you to configure various shooting scenarios that require precise delays and also works as an intervalometer for time-lapse photography. Unlike the Giga T Pro, Captur Module Pro will work as a conventional flash trigger in addition to the remote triggering functionality when paired with a Captur unit.The control unit has settings for Hours, Minutes and Seconds (HH:MM:SS) and a mode delay of 00:01 through 10:00 seconds (duration in 1/100th second). A 4 way rocker for modes and a central push button for setting the parameters. Buttons for triggering, start/stop and lock. There are four configurable options:
- Delay - lets you set an interval between the time the trigger is fired and the shutter is activated.
- Long - allows you to set a long exposure duration - the camera must be set to bulb mode. It is also possible to do long exposures without programming. This is achieved by depressing the release button for 3 seconds and the bulb function will lock and you can release the button. Depress the button once more to end the bulb exposure (long exposure).
- Interval 1 - is configured to set the interval between shots and then N1 sets the number of shots to take.
- Interval 2 configures the time between interval (Interval 1) activation sand N2 configures the number of times the Interval 1 and N1 sequence is repeated.
Using the Captur Module pro is easy if you are familiar with the Gia T Pro system. There is an online manual that is reasonable week detailed for those who have not used a Giga system or are new to Remote triggers and intervalometers.Configuring for various modes:All modes have some common options: sensitivity, amount of delay before the unit will trigger the shutter, the duration of shutter open when the camera is in bulb mode and the number of allowed activations. To enable a mode all you need to do is to press the Start/Stop button to start the process. A ready LED turns green and when the mode is triggered the LED turns Red as a verification.To set the mode, use the rocker switch to get to the sensor mode you want. The modes are in the following order:Sound mode- adjust the sensitivity of the sensor as needed.Infrared (IR) mode, (you need to use the Module - IR). Set the Module - IR and the Module - Pro so they are aligned with the IR beam lens in line-of-sight with the receiver window of the Module Pro. When the IR beam is interrupted the unit will be triggered. The Module IR has High/Low setting. Use the low setting for a beam length of 4.5 feet or less and the High for lengths greater than 4.5 feet.Light Mode - here the sensor is activated when there is a change in light level - bright to dark, dark to bright. Ideal for fireworks, lightning, or indoors with any light being turned on or off.Laser - this mode requires a laser beam to be pointed at the receiver window and works the same way as the IR beam but with a much greater distance between transmitter and receiver.AUX - this mode requires you to connect any triggering device to the Captur Module Pro via a 1/8” Tip-shield plug.Pricing:The Captur Pro Module is $120, Two receiver modules are $45 each; A pair of flash triggers not reviewed are $100 and the Capture Timer Module also not reviewed is $60.Conclusion:In my opinion the Captur system is probably the most versatile triggering system I have used and as it uses AA batteries it will last through extremely long time-lapse sequences without having to worry about a premature shutdown. The construction is solid as is the performance. In all of the tests performed the unit did not miss-fire.
Think Tank Retrospective Leather - just released
Think Tank Photo just announced the release of two new product line extensions as well as a new “free gift” offer.The first are the Retrospective® 5 Leather, Retrospective® 7 Leather, and Retrospective® 30 Leather. These upscale, rugged shoulder bags maintain the Retrospective’s casual, form-fitting design. A new Dual Cross buckle on the front flap provides an extra measure of security. The new shoulder bags are designed to hold tablets and laptops in dedicated zipper pockets.Click here to shop
The new Mirrorless® Mover 25i fits one medium to large mirrorless body, plus two to four lenses, an 8” tablet, and additional accessories. It features metal hardware, high quality fabrics, YKK® zippers and a magnetic closure.Click here to shopAnd, through the end of September, whenever you buy an eligible backpack from Think Tank you will receive the Camera Support Straps V2.0 along with a Camera Strap V2.0 free! Think Tank offers a wide variety of innovative, high quality transportation and field photography backpacks. Order one and you will get to experience something really unique, which is having the weight of your camera shifted from your neck to your backpack harness system. With the Camera Support Strap V2. no more sore shoulders or neck aches!Click here for this offer
MacPhun updates Noiseless Pro
NOISELESS PRO UPDATE - get an improved Creative Kit at 73% OFF with this new app version inside!The major news is that Noiseless Pro, which provides a one-click solution for eliminating digital noise, now includes the option of BATCH PROCESSING.Key Improvements:Noiseless remains the fastest noise reduction software for Mac, with the update bringing a 14% speed increase.With Batch Processing, users can process a number of images at once, resizing, renaming and saving files in popular image formats (JPG, TIFF, PNG)You will have the option to select from automatic noise reduction, use a built-in preset, or even create their own custom preset. Custom batching presets can also be saved so a combination of options chosen previously can be used again.The Light, Moderate and Medium presets have been improved to give even better results with portraits and photos where the noise is minimal.The new Noiseless Pro will be available for $49.99 as a limited time offer, with a possibility for upgrade from standard Noiseless for $29.99.You can purchase Noiseless Pro - for $49.99 you only get one app, while $99.99 will get you the complete Creative Kit all 5 Pro apps together!If you own the standard version of Noiseless, you can get Batch Processing via an in-app purchase for only $7.99 or by upgrading to Noiseless Pro. Owners of the Pro version will receive a free, automatic update. CLICK ON THE Noiseless Pro Icon to get the product.
Also check out FX Photo Studio and its stunning filters. All for just $9.99 at the app store.
[embed]https://www.youtube.com/watch?v=_ho9OhgM2Rk&feature=youtu.be[/embed]
Peak Design - CLUTCH - an excellent hand strap
This is the second in my three-part review of the Peak Design camera strap product line. Here I review the Clutch. This is a comfortable and beautifully constructed support strap. This is no ordinary hand strap, it is not only easy to attach but has a wonderful feel around the back of your hand.
 |
 |
The top end is attached to the strap loop of your camera via a looped band that is then attached to the strap using a spring-loaded trap-door style locking mechanism. The other end is connected via an Anchor Link attached to the supplied camera base plate or your Really Right Stuff compatible plate.
I attached this to all three of my mirrorless cameras and my wife’s Canon 6D. I found it to be most comfortable when attached using the supplied plate or the RRS plate on my Panasonic GH4 and with the Canon 6D. On the Olympus OM-D E-M1 and the Sony A7R the RRS plate extends too far to the right that provides too much slack. This slack has the Anchor Link clasp interfering with your hand and is not comfortable at all. However if you use the supplied base plate this is no longer an issue.Once the Clutch is properly attached it is a breeze to tighten it for a perfect grip by pulling on the tab of the tightening band. To loosen, you simply lift on the end of the friction loop to release the tension.
As with any hand strap there is a concern of the camera possibly slipping out of your hand and falling to its doom. If this is a concern, you can easily solve this by attaching a second Anchor Link to the base plate and use a to secure the camera to your wrist, using the “Cuff”.
Specifications (from the Peak Design product page)
- Weight: 45 g (123 g as packed)
- Strap length: adjustable from 18 cm (7 in) to 29 cm (11.4 in)
- Strap width: at the widest point, 51 mm (2 in)
- Strength rating: Vectran®-corded Anchors can withstand over 200 lbs (90 kg), making Clutch safe for use with the largest of professional cameras
Build quality
Of all the straps that I have used in the past and currently, I find the Peak Design Clutch to have been made exceptionally well as I have found with the other Peak Design straps. As with the Slide, every component is beautifully constructed, all the stitching is truly well executed. The adjusters, the loops and the tripod plate are all of the highest standards.I have been using the Clutch to my Panasonic Lumix GH4 for two weeks and am very pleased with the performance. . With the cuff as added security this is an excellent combination.
My final assessment
This is undoubtedly the most comfortable hand strap I have used. It is ideal for the lighter DSLR’s and any mirrorless bodies on the market. Of significance is the easy of tightening and loosening the strap.I would not hesitate to recommend the Clutch and give it 4 1/2 star rating out of a possible 5. The street price is about $40.To get any Peak Design product click on the logo below for a 10% discount.
Peak Design - SLIDE - an awesome camera strap
This is part one of a three-part review of three camera straps made by the kick starter company called Peak Design. I had heard about these from a number of sources including my friends at TWiP (This Week in Photography). Peak Design were kind enough to send me the Slide and the Clutch and I ended up getting the Cuff. After this bit of testing I should consider getting the leash too as you will see from my review.
Let's start with the Slide which is the most versatile strap in this family of straps. The strap is made of materials similar to those found in automobile seat belts. The two ends of the strap terminate with a unique attachment system made off a spring loaded slide-in connector that connects to a Kevlar loop clip system. The strap is actually two belts fused together in the central area that would typically wrap around your neck or across your shoulder. The fused area has a slight padding with one side same as the belt while the other side has silicone striping to provide enough friction to prevent it from slipping off the shoulder. I find this double-sided arrangement very convenient. It is so easy to switch between the surfaces for those times you want to use the strap as a slide or have it in it's nonslip mode across your shoulder. To maintain uniformity there are two adjustment loops at either end. An anodized aluminum metal handle mechanism allows you to extend or retract the length of the strap but you must do on both ends to keep the padded area in the middle.The Slide strap kit comes with the strap, four Anchor Link connectors, one square Arca Swiss compatible camera plate, an allen wrench on a ring, a carrying pouch and a user manual. These are all nicely packaged in a well-designed box.
I attached two Anchor Links to either end of my camera where you would typically attach your OEM camera strap. I attached a third Anchor Link to the loop connector of my existing Really Right Stuff extendable camera plate. With three connectors I am able to use the strap in various configurations. The most convenient is across the shoulder where I can easily bring the camera into shooting position with my hand on the grip and index finger on the shutter release with no obstruction. If I need to Carry the camera around my neck, I can easily detach the connector from the base plate and attach it to the free connector at the top. For the various ways you can sling slide I found carrying the camera on one shoulder to be the least secure and also not very comfortable.
 |
 |
 |
For hand holding the camera the I attach the Clutch (more on this in Part 2) by attaching it to the two Anchor Links attached to the side of the camera body top and bottom (RRS Plate).
Specifications (from the Peak Design product page)
- Weight: 171 g (281 g as packed)
- Strap length: adjustable from 99 cm (39 in) to 137 cm (54 in)
- Strap width: 45 mm (1.8 in)
- Strength rating: Vectran®-corded Anchors can withstand over 200 lbs (90 kg), making Slide safe for use with the largest of professional cameras
Build quality
Of all the straps that I have used in the past and currently, I find the Peak Design Slide to have been made exceptionally well. Every component is beautifully constructed, all the stitching is truly well executed. The adjusters, the loops and the tripod plate are all of the highest standards.I use the slide mounted to a Canon 6D and on my Sony A7R for about 10 days now and am very happy with the performance. I always like to remove my camera strap when I mount the camera on my tripod so as to prevent any shake as straps tend to act like mini sails in windy conditions. This requires constant disconnecting and connecting Anchor Links. So far, they have all performed extremely well and it appears these will not give or come loose for a long time..
My final assessment
I am very happy with the performance and comfort of this strap the Slide. It is really designed for any camera but my preference would be to use the Slide for heavier DSLRs and mirrorless camera bodies. A slimmer version but with the same wide shoulder padding would be ideal for the smaller minimalist mirrorless bodies. The Peak Design Leash comes close but does not have the comfort padding.I would not hesitate to recommend the Slide and give it 4 1/2 star rating out of a possible 5. The street price is about $60. Keep in mind that a small Arca Swiss camera plate will cost you a minimum of $20 - here one is included. This to me is a great bonus.To get any Peak Design product click on the logo below for a 10% discount.
Lumix® G VARIO 100-300mm / F4.0-5.6 / MEGA O.I.S. Lens
Went out to photograph the marsh wrens at the Great Meadows NWR yesterday. The wrens were there but the windy conditions kept them deep in the reeds. I had taken my Lumix 100-300 lens on the Olympus OM-D E-M1 body. I have a lens collar and at the foot manufactured by Roesch - www.r-roesch.de which really helps with this lens when mounted to a tripod.As there was not much in the vicinity I took a few shots of a Red-wing Blackbird - the bird was a little spec in the frame as you can see from the image below. The full image may be seen by clicking on the image itself.
The next image is a crop from the region where the bird was sitting. Except for RAW conversion and a slight opening of the shadows, no other post processing has been done. Click to open the image at 100%
For the price this is an exceptional lens and hope Panasonic make a G X version of this lens soon.